
Short answer: The ME800D-48 is the diesel version of the ME800-48. It suits canal and irrigation channel banks with long routes, where operators want diesel fuel and an 800 mm deck that fits narrow towpaths. The product page lists a 45° slope rating and 30–300 mm cutting height. Diesel models are not supplied to the US market.
Why canal banks need a different approach
Canals and irrigation channels run for kilometres. Their banks must be cut so the channel can be inspected, so weeds do not block flow and so the towpath stays usable. The banks are often steep near the water, and the towpath is narrow.
Tractor arms work from the towpath but need room and leave the operator close to the edge. Strimming long routes takes many people. A remote tracked flail mower lets one operator cut the bank while standing back on the towpath.
ME800D-48 product page figures
| Item | Product page figure |
|---|---|
| Engine | KOOP 192 diesel, 12 HP |
| Cutting width | 800 mm |
| Control system | 48 V |
| Electric power | 2,000 W |
| Blades | 30 (flail) |
| Cutting height | 30–300 mm (adjustable) |
| Max slope | 45° |
| Remote range | 800 m |
| Travel speed | 0–5 km/h |
| Fuel tank | 5.5 L |
| Weight | 402 kg |
| Dimensions (L×W×H) | 1750×950×920 mm |
| Listed working efficiency | 4,000 m²/hour |
Data from the live MERI product page. Confirm the order configuration with MERI before you buy. Diesel models are not supplied to the US market. US buyers should look at the gasoline versions.
Why diesel on long routes
On long canal routes, fuel supply and long run times matter. Many waterway authorities and contractors already run diesel fleets and prefer one fuel type. The ME800D-48 uses a KOOP 192 diesel engine with 48 V electric control. It shares the 800 mm deck and the 950 mm overall width with the gasoline ME800-48, which suits narrow towpaths.

Route planning
- Split the route into sections between bridges, locks and access points.
- Note towpath width, gates and bridge clearances on each section.
- Plan where the van or trailer can stop to unload.
- Agree with the waterway owner which banks are cut and how far down.
- Schedule work away from busy towpath hours where possible.
Water-edge rules
Cut the upper bank and the bank face only where the ground is firm. Leave the margin at the waterline unless the owner asks for it and the ground is safe. Work along the bank, not down toward the water. Keep a recovery plan for the machine, and never stand on an undercut edge to watch it.
| Bank zone | Approach |
|---|---|
| Towpath verge | Mow at a tidy, regular height |
| Upper bank face | Main work zone for the ME800D-48 |
| Lower bank near water | Only if firm; otherwise leave |
| Waterline margin | Hand work or leave as habitat |
Local watercourse and nesting rules apply. Check them before the season.
Towpath users
Walkers, cyclists and anglers use many canal towpaths. Post signs at each end of the section, use a lookout on busy days, and stop the machine when people pass. The remote control lets the operator stop the machine at once, and the flail deck throws less than an open rotary deck. Still, keep people clear.
Daily machine checks
- Flail blades and bolts: none missing, bent or loose.
- Rotor: free of wrapped weed, rope and fishing line.
- Tracks: tension set and mud removed.
- Remote control: charged and stop function tested.
- Diesel and oil checked away from the water’s edge.
Canal banks collect fishing line and rope. Check the rotor ends at every stop; wrapped line heats the bearings and shortens their life.
A worked example
A 3 km canal section has a bank face about 3 m deep on one side: about 9,000 m². The product page lists 4,000 m² per hour for open ground. Allow extra for narrow sections, bridges and stops for towpath users. Log the real time on the first visit; it is the best base for the rest of the route.
Related MERI pages
- ME800D-48 diesel flail mower
- Canal and irrigation channel bank maintenance
- Remote ditch mowers
- ME800-24 vs ME800-48
- Slope ratings by model
- Slope mowing risk assessment template
Frequently asked questions
Is the ME800D-48 available in the US?
No. Diesel models are not supplied to the US market. US buyers can look at the gasoline ME800-48.
What engine does it use?
The product page lists a KOOP 192 diesel engine, 12 HP, with a 48 V electric control system.
Will it fit on a narrow towpath?
The product page lists dimensions of 1750×950×920 mm. Measure towpath width, gates and bridges along the route.
Can it mow down to the waterline?
Only where the bank is firm. Leave soft margins for hand work or as habitat.
Send us your site details
Tell us the job, area, slope and country. MERI replies within 24 hours.
Need a mower recommendation for your terrain or project?
Get a Quote