
Short answer: Voles feed and nest under cover. Tall grass, weeds and mulch piled against trunks give them a safe place to gnaw bark and roots, mostly in autumn and winter. Keeping the orchard floor short, especially with a final cut before winter, takes away much of that cover. Mowing works best together with a clean strip around the trunks, trunk guards and regular checks.
Vole damage is easy to miss until spring. By then, a young tree may be girdled at the base or have lost much of its roots. Growers in apple, pear, cherry and nut orchards ask us how much mowing helps. This guide explains the link between grass height and vole pressure, and how to fit mowing into a control plan.
Why voles like tall grass
Voles are small rodents that live in runways and burrows under grass. Cover protects them from hawks, owls, foxes and cats. A thick layer of grass also keeps their runways warm in winter.
When food is short, voles chew the bark at the base of trees and the roots just below the surface. A ring of bark chewed right around the trunk can kill a young tree. Damage is often worst under snow or under a mat of dead grass, where nobody sees it.
How mowing reduces the risk
- Short grass means less cover. Voles are more exposed to predators and less likely to settle.
- A late-season cut matters most. Cutting short before winter removes the mat they would live under.
- Regular cuts stop the build-up. A sward that is cut often does not form the thick thatch voles prefer.
- Clean tree lines help. Keep grass, weeds and mulch away from the trunk base.
Mowing alone will not clear a heavy vole population. It lowers the pressure and makes the other measures work better.

A mowing plan for vole control
| Season | Mowing task | Other checks |
|---|---|---|
| Summer | Regular cuts in the alleys to stop thatch building up | Keep the tree strip clean |
| Early autumn | Keep the sward short as growth slows | Look for fresh runways and burrow holes |
| Late autumn | Final short cut before winter | Fit or check trunk guards; pull mulch back from trunks |
| Winter | No cutting needed in most climates | Check young trees after snow melts |
| Spring | First cut as growth starts | Inspect trunk bases and replace dead trees |
Timing varies by climate and species. Your local adviser can tell you which vole species is present and when it does most damage.
Why the late cut is often missed
The final cut before winter falls when the ground is wet, the days are short and the crew is busy with harvest and pruning. On steep or soft blocks, the tractor often stays in the shed. Those are the blocks where voles do well over winter.
A tracked remote mower can cut those blocks without putting a driver on the slope. The operator walks the headland and keeps the machine in sight. On soft ground, the rubber tracks spread the weight and leave fewer ruts than tyres.
Which machine fits
For alleys that are cut often, a flat-blade machine leaves a short, even finish. The ME650-T cuts 650 mm wide, weighs 200 kg and stands 500 mm high, so it fits under many low branches. The ME550-T is narrower at 550 mm and 160 kg. T-series models cut from 20 to 200 mm.
If growth has been left long, a flail model handles the first cut better. MERI flail mowers cut 800 to 1200 mm wide with a 30 to 300 mm cutting height. See flat-blade vs flail remote mowers to compare.

Close to the trunk
No mower should touch the trunk. Leave a margin and keep the area right around the trunk clear with your usual under-tree method. Trunk guards protect young trees where voles are common. Make sure the guards are sound and pushed slightly into the soil.
More planning notes for orchards are on our pages for apple orchards and steep orchard slopes.
What to send MERI
- Alley width, tree spacing and lowest branch height.
- Slope of each block and ground condition in late autumn.
- Usual grass height before the final cut.
- Area to cut and the time you have.
- Number of units and destination country.
Need help choosing? Use the MERI remote mower selector.
Frequently asked questions
Does mowing stop vole damage?
It lowers the risk by removing the cover voles live in. It works best together with clean tree strips, trunk guards and regular checks.
When is the most important cut?
The last short cut before winter. It removes the grass mat voles would shelter under while they feed on bark and roots.
How short should orchard grass be for vole control?
Keep alleys short and even, and stop thatch from building up. Your adviser can suggest a height for your site and vole species.
Which MERI mower suits low branches?
The flat-blade T series is 500 mm high. The ME650-T cuts 650 mm wide and weighs 200 kg; the ME550-T is 550 mm wide and 160 kg.
Keep your orchard floor short on time
Send alley widths, slopes and branch heights. MERI will suggest a model and quote for growers, contractors and dealers.
Need a mower recommendation for your terrain or project?
Get a Quote