Solutions · Pipeline corridors

Remote Forestry Mulchers for Pipeline Rights-of-Way

Pipeline corridors must stay open for patrols, leak checks and access. They are long, often steep and overgrown between visits. A 1 m remote mulcher clears the strip while the operator stands well back from flying debris.

The ME-RFM1000-D clears 3,000–4,000 m²/h (indicative) and reaches 500 m by remote. Cutting height adjusts from 5 to 400 mm, so you can keep the rotor clear of the ground and markers.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI ME-RFM1000-D and ME-RFM1000-E forestry mulchers
ME-RFM1000-D and ME-RFM1000-E
1,000 mmWorking width
5–400 mmCutting height (D)
up to 30 cmBranch diameter
500 mME-RFM1000-D range
45°ME-RFM1000-D operating slope

Data

Corridor-relevant figures

From the ME-RFM1000-D and ME-RFM1000-E TDS. Diesel models are not supplied to the US market.
ItemME-RFM1000-DME-RFM1000-E
Power25 hp water-cooled diesel30 kWh LiFePO4, 9 kW cutter motor
Width / cutting height1,000 mm / 5–400 mm1,000 mm / lift 0–400 mm
BranchesUp to 30 cmUp to 30 cm
Work rate3,000–4,000 m²/h (indicative)Not listed
Remote range500 m200 m
Slope45° operating slope35° operating angle
Run timeContinuous (refuel)About 7 h per charge
Size / weight1,950 × 1,250 × 870 mm, 550–600 kg2,080 × 1,250 × 640 mm, 882 kg

Planning

Corridor length and time

Calculated from the lower ME-RFM1000-D work rate. Dense brush, slopes and moves between sections take longer.
CorridorArea at 10 m wideTime at 3,000 m²/h
1 km1 haAbout 3.3 h
5 km5 haAbout 17 h
10 km10 haAbout 33 h

What it means for you

Corridor practice

Mark the line

Follow the operator’s markers and keep the rotor above ground level.

Set height first

Start high, then lower in passes once you know the ground.

Plan the moves

Measure trailer access points between sections.

Keep sight

Long range does not mean working out of view.

ME-RFM1000-D passing through tall growth

Access

Getting to the corridor

The ME-RFM1000-D is 1,250 mm wide and ships in a 2,000 × 1,250 × 900 mm wooden case. On site it travels on 180 mm tracks, so it can reach sections where a larger carrier cannot.

Questions

Frequently asked questions

Can the cutting height be set above the ground?

Yes. The ME-RFM1000-D lists 5–400 mm, adjusted by remote hydraulic control.

How far can the operator stand?

Up to 500 m on the ME-RFM1000-D and 200 m on the ME-RFM1000-E. Keep the machine in sight.

How much corridor per day?

At 3,000 m²/h, a 10 m wide corridor is about 1 km in 3.3 hours of cutting.

What size branches can it handle?

Up to 30 cm in diameter.

Can it work on steep sections?

The ME-RFM1000-D lists a 45° operating slope. Check the ground first.

Keep reading

Related MERI resources

Clearing a corridor?

Send corridor length, width, slope and growth type. We reply within 24 hours.