Solutions · Reforestation

Remote Forestry Mulchers for Reforestation Site Preparation

Before new trees go in, brush and slash must be cleared so planters can work and seedlings get light. Burning is often banned and hand clearing is slow. A remote mulcher turns the cover into mulch that protects the soil.

ME-RFM1000 mulchers clear 1,000 mm per pass and take branches up to 30 cm. The ME-RFM1000-D lists 3,000–4,000 m²/h (indicative), 45° operating slope and 500 m remote range.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI ME-RFM1000-D diesel forestry mulcher
ME-RFM1000-D
1,000 mmWorking width
up to 30 cmBranch diameter
3,000–4,000 m²/hME-RFM1000-D (indicative)
45°ME-RFM1000-D slope
5–400 mmCutting height (D)

Plan

Strip or full clearing

Calculated from the lower ME-RFM1000-D work rate. Dense slash, stumps and slopes take longer.
MethodWhat you mulchArea mulched per hectareTime at 3,000 m²/h
Full clearingThe whole site10,000 m²About 3.3 h
Planting strips 1 m wide, 3 m apartOne pass per planting rowAbout 3,300 m²About 1.1 h
Planting strips 2 m wide, 4 m apartTwo passes per rowAbout 5,000 m²About 1.7 h

Data

Mulcher figures for site preparation

From the ME-RFM1000-D and ME-RFM1000-E TDS. Diesel models are not supplied to the US market.
ItemME-RFM1000-DME-RFM1000-E
BranchesUp to 30 cmUp to 30 cm
Cutting height / lift5–400 mm0–400 mm
Slope45° operating slope35° operating angle
Remote range500 m200 m
Run timeContinuous (refuel)About 7 h per charge
Weight550–600 kg882 kg

What it means for you

Site preparation tips

Strips save time

Mulching only the planting rows cuts machine hours.

Keep the mulch

A mulch layer holds moisture and slows weeds.

Stumps

Lift the rotor over stumps; set height to the highest.

Plan with planters

Agree row spacing before the machine starts.

ME-RFM1000-E mulching a small tree

Follow-up

After planting

In the first years, competing brush grows back between the rows. A lighter pass with the mulcher, or a flail mower, keeps the young trees clear.

Questions

Frequently asked questions

Can a remote mulcher prepare a planting site?

Yes. It clears brush and slash up to 30 cm and leaves mulch on the ground.

Do I have to mulch the whole site?

No. Mulching only planting strips can cut machine time by half or more.

How fast is it?

The ME-RFM1000-D lists 3,000–4,000 m²/h. Dense slash is slower.

Can it work on steep ground?

The ME-RFM1000-D lists a 45° operating slope. Check the ground first.

Diesel or electric?

Diesel for remote sites and long days; electric for sites near homes or with charging.

Keep reading

Related MERI resources

Preparing a planting site?

Send area, slope, cover type and planting plan. We reply within 24 hours.