Remote Control Mowers for Wind Farm Vegetation

Clear turbine-pad edges, access tracks and drainage slopes. Match the deck and blade setup to the widest maintenance zone and the narrowest access point.

  • CE Certified
  • EPA Compliant
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
A red remote mower cutting grass next to a raised roadside drainage verge
MERI mower cutting a roadside verge.
6,000 m²/hWork rate, up to
45°Rated slope, up to
48 hCommon spare parts shipped
800 mRemote range, up to
100+Countries exported
24 hReply time

The vegetation jobs on a wind farm

Turbine pad and crane hardstand edges

Access-track verges and drainage ditches

Steep cut-and-fill slopes beside the tracks

Substation and transformer fence lines

Firebreaks in dry regions

Site conditions

Why remote fits wind sites

Slopes

: Compare bank angle, slope direction and the model’s working limit. Choose a clear operating position.

Lone working

: Keep the machine in view from the agreed work position. The rated remote range is up to 800 m.

Transport

: Compare the model and packed weights with the trailer’s rated payload and the road and pad access.

Tough growth

: flail/hammer blades, cutting height up to 300 mm for scrub that has grown all season.

Model choice

Recommended configurations

Compare work zones and mower configurations.
JobModelOutput
Pads and vergesME1000-48up to 5,000 m²/h
Long slopes, large sites (diesel fleet)ME1200D-48up to 6,000 m²/h
Fence lines, ditchesME800-48up to 4,000 m²/h, compact

Working conditions example

Red remote mower beside cut vegetation along a utility corridor
MERI mower clearing vegetation along a utility corridor.

For O&M contractors

Group turbines by access route and set separate allowances for transit, unloading and cutting. MERI stocks 46 spare-part types for dispatch within 48 hours.

Plan the first job

Map hardstand edges, access-road verges and slopes as separate work zones.

Mark cables, drains, fence clearances and turning areas.

Give the contractor route lengths, loading access and site wind limits.

Questions

Frequently asked questions

Which areas of a wind farm can the mower maintain?

Turbine pads, crane hardstands, access-track verges, substation fence lines and drainage ditches.

Can it work on hillside sites?

Selected models are rated up to 45° under suitable conditions. Agree the approved slope, operating position and clearances with the site team before mowing.

How much can one machine cover?

The ME1000-48 covers up to 5,000 m² per hour and the diesel ME1200D-48 up to 6,000 m² per hour.

Does it reduce fire risk around turbines?

Cutting grass around approved pads and verges can reduce dry vegetation. Follow the site’s fire precautions and work windows.

Can O&M contractors run a fleet?

Yes. We quote fleet kits with spares; the 46 most-used spare-part types ship within 48 hours, and we reply within 24 hours.

Keep reading

Related buying resources

Plan mowing across your turbine sites

Send the site measurements and a few photos. We reply within 24 hours.