Sector guide · Energy sites

Remote Mowers for Energy Sites

Operations and maintenance teams on solar farms, wind farms, substations and power-line corridors face different vegetation on the same contract. This page brings MERI’s energy-site guidance together and shows which machine to start with for each part of the site.

Best fit: solar and wind O&M contractors, utility vegetation teams and the dealers who supply them.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower cutting grass between solar panel rows
MERI tracked mower between solar panel rows
500 mmME550-T / ME900-T height
45°Mower slope rating
800 mMower remote range
550–1200 mmMower cutting widths
1000 mmForestry mulcher width
30 kWhBattery mulcher option

Summary

Short answer

Under low solar panels, start with a T-Series mower: the ME550-T and ME900-T are 500 mm high and leave a flat-blade finish. Confirm the ME650-T overall dimensions with MERI before checking clearance. Along fence lines, access tracks, wind turbine pads and substation surrounds, a flail mower handles longer and rougher growth.

On power-line corridors and overgrown boundaries with woody growth, the ME-RFM1000-D diesel or ME-RFM1000-E battery forestry mulcher clears the scrub first. The battery model suits sites where fuel handling or noise is a concern.

Fit check

Which machine for which part of the site?

Machine figures from the MERI product pages. Follow the site owner’s electrical safety and access rules.
Site areaStart withWhyMERI guide
Under low solar panelsME550-T, ME650-T or ME900-TME550-T / ME900-T: 500 mm high; confirm ME650-T clearance dimensions. Flat blades for regular cutsLow-clearance solar
Solar fence lines and perimetersME800 or ME1000 flail modelsRough growth along fences; 30–300 mm cutSolar fence lines
Battery storage and substationsFlail or T-Series by grass heightOperator outside the fenced area with up to 800 m rangeBESS and substations
Wind farm pads and access roadsME1000 or ME1200 flail modelsLarger open areas and banks rated to 45°Wind farms
Power-line and pipeline corridorsME-RFM1000-D or ME-RFM1000-E1000 mm mulching head for scrub and small treesUtility rights of way
Low-emission or quiet sitesME-RFM1000-E30 kWh battery, about 7 h operation per the TDSME-RFM1000-E

Working on energy sites

What to plan for on an energy site

MERI tracked mower working under a row of solar panels
A tracked mower working under solar panels.
  • Clearance. Measure the lowest panel edge at its lowest tilt. The ME550-T and ME900-T are 500 mm high; confirm the ME650-T overall dimensions with MERI.
  • Row spacing. Check the gap between rows against the overall width: 1000 mm for the ME550-T and 1300 mm for the ME900-T; confirm the ME650-T overall width with MERI.
  • Debris. Walk the rows for stones, cable ties and loose fixings before the first cut.
  • Cables. Mark exposed cables, junction boxes and inverter pads as no-go zones.
  • Operator position. Work from outside fenced areas; mowers have up to 800 m remote range.
  • Schedule. Plan cuts around the growing season and the site’s shading limits.

Model shortlist

MERI machines for energy sites

Figures from the product pages.

Figures from the MERI product pages and model TDS.
ModelCutting systemOverall widthHeightWeight
ME550-T550 mm flat blade1000 mm500 mm160 kg
ME900-T900 mm flat blade1300 mm500 mm280 kg
ME1000-481000 mm flail1150 mm920 mm424 kg
ME-RFM1000-D1000 mm mulching head1250 mm870 mm550–600 kg
ME-RFM1000-E1000 mm mulching head1250 mm640 mm882 kg

Limits

Where to take care

Panels lower than the machine.

If the lowest panel edge is below 500 mm plus a margin, no MERI mower will pass under it. Raise the tilt or trim by hand.

Thick woody growth under panels.

Forestry mulchers are 640–870 mm high and 1250 mm wide. Use them on open corridors, not under arrays.

Diesel in the United States.

For US energy sites, choose gasoline mowers or the battery mulcher. MERI does not recommend its diesel models there.

Before you ask for a quote

What to send MERI

Site type and the area of each zone.

Lowest panel edge and row gap.

Grass height, woody growth and cutting cycle.

Fleet size, destination and fuel preference.

Questions

FAQ

Which MERI mower fits under solar panels?

The T-Series: ME550-T, ME650-T and ME900-T. The ME550-T and ME900-T are 500 mm high; confirm the ME650-T overall dimensions with MERI. Check the lowest panel edge against the confirmed height with a margin.

What about the fence lines on a solar farm?

A flail mower such as the ME800-24 or ME1000-48 handles the longer, rougher growth along fences and perimeter tracks.

Is there a machine without an engine?

Yes. The ME-RFM1000-E forestry mulcher runs on a 30 kWh LiFePO4 battery with a 9 kW cutter motor. The TDS gives about 7 h of operation.

Can one fleet cover a whole solar or wind site?

Most sites need two types: a T-Series mower for the rows and a flail mower for perimeters and banks. Send us the site plan and we will suggest a mix.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send your site plan for a fleet mix

Tell us the zones, clearance, growth and fleet size. We reply within 24 hours.