Model comparison

ME900-T vs ME800-24: Flat-Blade Turf Mower or Flail Mower?

The ME900-T and ME800-24 cut a similar strip but do different work. The ME900-T has two flat blades for a lawn finish and a 500 mm high body. The ME800-24 has 30 flails for long, rough growth. Start with the grass you cut, not the width.

Short rule: maintained grass and low structures, choose the ME900-T; long grass, weeds and light scrub, choose the ME800-24.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
Black MERI ME900-T remote control mower cutting a landscaped lawn
MERI ME900-T on a landscaped lawn
900 / 800 mmCutting width
500 / 920 mmMachine height
1300 / 950 mmOverall width
280 / 355 kgWeight
20–200 / 30–300 mmCutting height
45°Slope rating, both

Summary

Short answer

Choose the ME900-T for grass that is cut on a regular cycle: parks, lawns, solar rows and banks where the finish matters. It is 500 mm high, so it fits under panels and branches where the ME800-24 cannot.

Choose the ME800-24 when grass is left long between visits or mixed with weeds and light woody growth. Flails mulch heavy material that flat blades would leave in clumps. Note that the ME800-24 is the narrower machine overall: 950 mm against 1300 mm.

Fit check

Side-by-side figures

Figures from the ME900-T and ME800-24 product pages and TDS, checked November 2026.
PointME900-TME800-24
Cutting system2 flat blades30 flail blades
Cutting width900 mm800 mm
Cutting height20–200 mm30–300 mm
Size (L × W × H)1450 × 1300 × 500 mm1650 × 950 × 920 mm
Weight280 kg355 kg
EngineLONCIN 452 gasoline, 16 hpLONCIN 459 gasoline, 18 hp
Travel drive24 V, 1300 W24 V, 1800 W
Slope rating45°45°
Remote range800 m800 m
Reference outputSite-dependent4000 m²/h

The deciding question

How long is the grass when you cut it?

MERI ME900-T cutting a lawn with its wide flat-blade deck
ME900-T flat-blade deck in a recorded field test.
  • Short, regular cuts. ME900-T. Flat blades leave an even, lawn-style finish.
  • Long or rough growth. ME800-24. Flails mulch tall grass, weeds and light growth.
  • Low clearance. ME900-T. At 500 mm high it passes under panels and branches.
  • Narrow gates. ME800-24. 950 mm overall width against 1300 mm.
  • Lighter trailer load. ME900-T. 280 kg against 355 kg.
  • Finish height. ME800-24 can leave up to 300 mm; ME900-T up to 200 mm.

Limits

Where each one is the wrong choice

ME900-T in rough cover.

Flat blades are for maintained grass. Long, woody or stony growth is work for a flail mower.

ME800-24 under low structures.

At 920 mm high it will not pass under low solar panels or fruiting branches.

Either one in woody scrub.

Stems thicker than about 50 mm need a forestry mulcher such as the ME-RFM1000-D.

Before you ask for a quote

What to send MERI

Grass height when you cut, and how often.

Lowest clearance under panels or branches.

Narrowest gate on the route.

Steepest slope, units and destination.

Questions

FAQ

Which is wider, the ME900-T or the ME800-24?

The ME900-T cuts a wider strip (900 mm against 800 mm) and is also the wider machine overall: 1300 mm against 950 mm. Measure your gates against the overall width.

Can the ME900-T cut long grass?

It is built for grass mowed on a regular cycle. For grass left long between visits, or mixed with weeds and scrub, the ME800-24 flail mower is the better tool.

Which fits under solar panels?

The ME900-T. It is 500 mm high; the ME800-24 is 920 mm high.

Do both run on gasoline?

Yes. The ME900-T has a LONCIN 452 engine (16 hp) and the ME800-24 a LONCIN 459 engine (18 hp). Both use 24 V electric track drive.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send photos of the grass you cut

Tell us the grass height, clearance, gate width and units. We reply within 24 hours.