Spec reference · Blades
MERI Mower Blade Count by Model: How Many Blades to Order
When you order spare blades, the first question is simple: how many does one machine carry? This page lists the count for every MERI remote mower, taken from the model technical data sheets.
800 mm flail decks carry 30 blades, 1000 mm decks 40 and 1200 mm decks 48. T-Series mowers use 2 flat blades. All blades are 6 mm manganese steel.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Flail mowers
Flail blade count by deck width
The blade count follows the deck width, not the engine or the voltage. A gasoline ME1000-24 and a diesel ME1000D-48 carry the same 40 blades.
| Models | Cutting width | Blades per machine | Cutting height |
|---|---|---|---|
| ME800-24 / ME800D-24 | 800 mm | 30 | 30–300 mm |
| ME800-48 / ME800D-48 | 800 mm | 30 | 30–300 mm |
| ME1000-24 / ME1000D-24 | 1000 mm | 40 | 30–300 mm |
| ME1000-48 / ME1000D-48 | 1000 mm | 40 | 30–300 mm |
| ME1200-24 / ME1200D-24 | 1200 mm | 48 | 30–300 mm |
| ME1200-48 / ME1200D-48 | 1200 mm | 48 | 30–300 mm |
T-Series
Flat blades on T-Series mowers
T-Series mowers cut with two flat blades instead of a flail rotor. They suit open turf and lower grass.
Planning
How many spare blades to order
There is no fixed replacement interval. Stones, wire and woody stems wear blades much faster than clean grass. Use the table as a starting point and adjust after the first season.
| Site type | Suggested spare stock | Why |
|---|---|---|
| Clean grass, few stones | 1 full set per machine | Covers a full blade change |
| Mixed ground, some stones | 1 full set plus about 25% loose blades | Single blades break before the set is worn |
| Rocky or woody sites | 2 full sets per machine | Blades chip and bend more often |
| Dealer stock (5+ machines) | 1 set per deck width you sell | Keeps the common sizes on the shelf |
Replace flail blades in opposite pairs, or as a full set, so the rotor stays balanced.
What it means for you
Before you order
Give the model
Send the full model name from the nameplate, for example ME1000D-48.
Add the bolts
Order blade bolts and nuts with the blades. Reused bolts can loosen.
Check the type
Flail blades and T-Series flat blades are not interchangeable.
Ship with the machine
Spare sets packed with a new mower avoid a second freight charge.

Shipping
Order spares with the machine
Spare blade sets can travel in the same crate as the mower. On export orders this is the cheapest way to have blades on site from day one.
Tell us the deck width and how many machines you run. We pack the sets and list them on the packing list.
Questions
Frequently asked questions
How many blades does the ME1200D-48 have?
48 flail blades. All 1200 mm MERI flail decks carry 48 blades.
Do 24 V and 48 V versions use the same number of blades?
Yes. The count depends on the deck width. ME800-24 and ME800-48 both carry 30 blades.
What are MERI blades made of?
6 mm manganese steel, according to the model TDS.
Can I fit flat blades on a flail mower?
No. Flail decks use a rotor with many small blades. The T-Series uses two flat blades on a different deck.
Should I replace one broken blade or the whole set?
Replace the broken blade and the one opposite it to keep the rotor balanced. Replace the full set when most blades are worn.
Keep reading
Related MERI resources
Need a spare blade set?
Send the model and the number of machines. We reply within 24 hours.