Sector guide · Water and flood infrastructure

Remote Mowers for Water Infrastructure

Water authorities, drainage boards and their contractors mow steep, wet banks that are unsafe for ride-on mowers. This page brings MERI’s levee, ditch, basin and treatment-works guidance together and shows which machine to start with for each asset.

Best fit: water authorities, drainage and flood-defence contractors, and dealers who supply them.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower on a steep grass dyke bank
MERI tracked mower on a grass dyke bank
45°Slope rating, MERI mowers
800 mRemote range, mowers
800–1200 mmFlail cutting widths
30–300 mmFlail cutting height
500 mmME900-T height
1000 mmForestry mulcher width

Summary

Short answer

For grass banks on levees, dykes, ditches and basins, start with a MERI flail mower. All twelve flail models are rated to 45°, cut 30–300 mm and have an 800 m remote range, so the operator can stand on the crest or the far bank.

Use a T-Series flat-blade mower where grass around treatment works and pumping stations is kept short. Where banks have been left and woody growth has taken hold, clear it first with a forestry mulcher, then maintain with a flail mower.

Fit check

Which machine for which asset?

Machine figures from the MERI product pages. Site guidance is general; follow the asset owner’s safety and access rules.
AssetStart withWhyMERI guide
Levee and dyke slopesME1200D-48 or ME1000D-4845° rating, 1000–1200 mm cut, 48 V drive for long banksLevee slopes
Drainage ditchesME800 or ME1000 flail models950–1150 mm overall width for narrow ditch bottoms and shouldersDitch mowing
Retention and stormwater basinsFlail mower, 24 V or 48 VWet side slopes; operator stays at the top of the bankRetention basins
Treatment works groundsME650-T or ME900-TFlat-blade finish on maintained grass. ME900-T: 500 mm high; confirm ME650-T clearance dimensionsTreatment works
Wet slopes and soft groundTracked flail mowerRubber tracks spread the weight; check the ground before cuttingWet slopes
Overgrown dam faces and banksME-RFM1000-D, then a flail mower1000 mm mulching head for woody growth, then routine flail mowingForestry mulchers

Working near water

What changes when the bank meets water

MERI tracked mower cutting a grass bank beside an irrigation channel
A tracked mower cutting a grass bank beside a channel.
  • Operator position. Up to 800 m remote range keeps the operator on the crest or the far side, not on the wet slope.
  • Travel direction. Plan the direction of travel from the site plan and MERI’s slope travel guidance before cutting.
  • Wet ground. Check the toe of the slope after rain; soft ground limits traction before slope does.
  • Cut height. Flail mowers adjust 30–300 mm, which helps where a longer sward protects the bank.
  • Debris. Walk the bank first for rock armour, gauges, outfalls and fencing.
  • Fuel choice. Gasoline or diesel; for the United States choose gasoline.

Model shortlist

MERI machines for water assets

Figures from the product pages. Widths are overall machine widths unless noted.

Figures from the MERI product pages and model TDS.
ModelCutting widthOverall widthWeightSlope rating
ME800D-24800 mm flail950 mm355 kg45°
ME1000D-481000 mm flail1150 mm424 kg45°
ME1200D-481200 mm flail1350 mm445 kg45°
ME900-T900 mm flat blade1300 mm280 kg45°
ME-RFM1000-D1000 mm mulching head1250 mm550–600 kg45°

Limits

Where a remote mower is not the answer

Underwater weed and reeds in the channel.

MERI mowers cut banks and berms. Weed in the water needs a weed boat or an excavator-mounted tool.

Wet slopes beyond 45°.

The 45° rating is for suitable ground. On wet clay or saturated toes, reduce the working angle or wait.

Woody growth over 50 mm.

Flail mowers are for grass and light growth. Thicker stems need the forestry mulcher first.

Before you ask for a quote

What to send MERI

Asset type, bank length and slope angle.

Ground condition near the water line.

Grass height, cutting cycle and any woody growth.

Fleet size, destination and fuel preference.

Questions

FAQ

Which MERI mower is used on levee slopes?

Start with a 48 V flail mower such as the ME1200D-48 or ME1000D-48. Both are rated to 45° and cut 1200 mm and 1000 mm respectively.

How far can the operator stand from the bank?

MERI mowers have a remote range of up to 800 m. Choose a position with a clear view of the machine and the water edge.

Can a MERI mower work on wet banks?

Tracked mowers handle damp banks, but soft or saturated ground limits traction. Check the toe of the slope after rain and reduce the working angle if needed.

What about banks overgrown with scrub?

Clear woody growth with the ME-RFM1000-D forestry mulcher, then keep the bank in check with a flail mower.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send your bank profile for a fleet quote

Tell us the asset, slope, ground and fleet size. We reply within 24 hours.